1. IntroductionAs the silicon counterpart of graphene, silicene has attracted much attention in quantum condensed matter research.[1,2] Owing to the low buckling structure, the energy gap of silicene can be controlled by applying electric field to create staggered potential.[3–7] Moreover, silicene possesses a strong spin-orbit coupling which is much larger than that in graphene, making it to be a quantum spin Hall insulator in nature.[8,9] Experimentally, many researchers have successfully synthesized silicene on kinds of substrates such as Ag(111), ZrB2(0001), Ir(111), and MoS2.[10–15] These unique properties make silicene a promising candidate for logic application.[16] In addition, there have already been some studies about proximity-induced superconductivity in silicene, which open up a research area involving coherent transport properties in silicene-based superconducting hybrid structures.[17–23]
Recently, the entanglement of quantum states has aroused great interests for its potential applications and fundamental importance in quantum information technology.[24–27] In solid state physics, it still remains a major challenge to create and detect entangled electrons. S-wave superconductors have been viewed as natural sources for entangled electrons, since a singlet Cooper pairs consist of two electrons with both spin and momentum entangled.[28,29] The crossed (nonlocal) Andreev refection (CAR) in superconducting heterostructures refers to that an electron from a normal metal electrode is incident into the superconducting region and reflected as a hole in another metal electrode.[30–32] Therefore the inverse process of the CAR is proposed to be a natural method to split a Cooper pair spatially.[33–35]
However, there also exist other accompanied processes such as the (local) Andreev reflection (AR), where the hole is reflected into the same terminal, the elastic cotunneling (EC, another nonlocal process), and the normal reflection (NR). These transport processes can mask the CAR and make its detection difficult in experiments.[36–38] Hence a lot of proposals have been put forward to increase the fraction of the CAR.[17,18,39–46] A graphene bipolar transistor is proposed to generate the pure CAR using energy band topology or the energy-filtering mechanism.[39,40] Some superconducting spin valve structures based on graphene, silicene and MoS2 are designed to obtain the pure CAR process.[18,41,42] In addition, it has been demonstrated that the fraction of the CAR can be enhanced a lot in the hybrid systems of the superconductor and the topological insulators.[43–45]
In this paper, we consider the quantum transport in a silicene-based normal/superconducting/normal (N/S/N) junction with the applied off-resonant circularly polarized light field and perpendicular electric field. By the optical and electrical modulation of the bands in the two normal regions, the exclusive CAR can be achieved with the suppression of the AR and the EC processes. Moreover, the exclusive EC and AR transports can also be obtained respectively by setting the proper parameters. It means that our system can realize a switch effect among the exclusive CAR, EC, and AR. These results reveal the potential of silicene-based hybrid structures for application in the correlation transport.
We organize this work as follows. In Section 2, we establish the theoretical framework which will be used to calculate the local and nonlocal conductances. In Section 3, we present the numerical results. Finally, we give a brief summary of the results in Section 4.
2. Model and formalismWe consider an N/S/N junction based on monolayer silicene, as illustrated in Fig. 1(a), where N represents two normal regions and S represents proximity-induced superconductiviting region. An off-resonant circularly polarized light, which just modifies the electron band structure through virtual photon transition processes,[47,48] and a perpendicular electric field are applied onto the two normal regions. The x–y coordinates are used to characterize the longitudinal and transverse directions in our system. For studying the possible transport properties through the system, we begin with the tight-binding Hamiltonian of this system expressed as[9]
Therein,
HS and
HN are respectively the Hamiltonians of the superconducting region and the two normal regions. They have the following forms:
where the zero external-field Hamiltonian is
[49]
In Eqs. (
2)–(
4),
cmα (
) annihilates (creates) an electron with spin
α on site
m,
US is the chemical potential of the superconducting region, which is set as 0.03 eV in the following,
Δ is the pairing potential and
λ = (
eAvF)
2/
ħΩ is the illumination parameter with
A as the amplitude and
Ω as the frequency of the off-resonant right-circularly polarized light, as defined in the Floquet theory. In addition, to satisfy the off-resonant condition, the photon energy
ħΩ must be larger than the silicene bandwidth 3
t0, where
t0 = 1.6 eV is the nearest-neighbor hopping energy. Hence, the lowest value of
Ω is about 1150 THz. An applied perpendicular electric field
can generate a staggered sublattice potential
in region
κ (
κ = L for the left region and
κ = R for the right region), where
e is the electron charge, 2l = 0.46 Å is the separation between the A and B sublattices in the
z direction, as denoted in Fig.
1(b), and
μm = ±1 for the A (B) sites.
Uκ is the chemical potential of the two normal regions.
λSO = 3.9 meV is the effective spin-orbit coupling parameter and
σ = (
σx,
σy,
σz) is the Pauli matrix of spin. 〈
m,
n〉 and 〈〈
m,
n〉〉 denote the summations over the nearest and next-nearest neighboring lattice sites, respectively.
νmn = −1 when the next-nearest neighbor hopping is clockwise and
νmn = 1 when the hopping is anticlockwise with respect to the normal regions of the monolayer silicene sheet.
Band structure of a system can be effectively used to account for its transport properties. For conveniently obtaining the band structure of the left or right normal region, we need to transform Eq. (3) into the momentum space form as given below[9]
where
η = 1 (−1) for K (K′) valley,
vF = 3
at0/2
ħ is the Fermi velocity with the lattice constant
a = 3.86 Å,
kx and
ky are the wavevectors in the
x and
y directions,
τ = (
τx,
τy,
τz) is the Pauli matrix of sublattice pseudospin,
s = ±1 is the spin index and
I is the identity matrix.
Combining the three kinds of main transports, the total conductance can be written as[46]
where
gEC,
gAR, and
gCAR respectively represent the conductance of the EC, the local AR, and the nonlocal CAR.
ky = 2
πn/
W is the transverse momentum with
n being an integer to denote the channels and
W representing the transverse width of the junction. The linewidth function
ΓL(R) can be defined as
, where
is the self-energy of the left (right) region.
V is the coupling matrix between the leads and the central region.
is the retarded (advanced) surface Green’s function of the left (right) region, which can be calculated by a recursive iteration method.
[50,51] Gr(a) = (
EI −
HS −
Σr(a))
−1 stands for the retarded (advanced) Green’s function of the central region, where
. The subscript e (h) denotes the electron (hole) component of the Nambu space.
3. Results and discussion3.1. Pure crossed Andreev reflectionIn Ref. [43], we have discussed the nonlocal transport in the bilayer graphene just induced by the valley polarization, where the spin degree of freedom is degenerate and inactive, and is not be involved in our investigation. Different from the bilayer graphene system, there exists the spin–orbit coupling in the silicene. The degeneration of the spin and valley degrees of freedom can be lifted at the same time under the coaction of the off-resonant circularly polarized light and the perpendicular electric field. Hence, in the following discussion, we must consider the effect of the spin degree of freedom. In order to reveal the non-degeneracy of the band structure more clearly, we first analytically give the energy eigenvalues of different spins and valleys in the two normal regions:
Correspondingly, on the K and K∲ points, equation (
7) can be simplified into the following forms:
Obviously, the degeneration of the spin and valley can be controlled by the electric field and the light field.
In Fig. 2, we set λ = 3λSO and
,
so equation (8) can be further simplified as:
,
,
for the left region and
,
,
for the right region. It can be seen that K valley is spin-polarized and K′ valley is spin-degenerated in the left region while the contrary is the case in the right region, as shown in Fig. 2(a), which depicts the band structures of the three regions. The length of the central region is set as d = 0.8ξ, where ξ = 3at/2Δ is the superconducting coherence length. In addition, the chemical potentials of the two regions are set as UL = −λSO and UR = λSO. Hence, the Fermi surface is just at the bottom of the conduction band of the left region and at the top of the valence band of the right region. In this case, we calculate the conductances gAR, gCAR and gEC versus the incident energy E, which are shown in Fig. 2(b) with different lines. It is worth noting that all of the conductance values in our paper are normalized by the ballistic normal conductance g0 = 2e2N(E)/h, where N(E) = EW/(πħvF) represents the number of the transverse modes. From Fig. 2(b), we can see that gCAR is much more than gAR and gEC, i.e., gCAR dominates while gAR and gEC are both suppressed. This means the pure crossed Andreev reflection can be generated in our system by the control of the electric field and the light field. The emergence of such a phenomenon can be explained well by Fig. 2(a). The incident energy of Fig. 2(b) is under 6.0 meV, so the incident electron from the left region locates at K′ valley. At the same time, the right region provides an electron from K valley. The two electrons from different valleys can constitute a cooper pair, which produces the CAR conductance gCAR. Moreover, because there is no K valley channels existing under 6 meV in the left region, the AR conductance gAR is almost 0. Similarly, the EC conductance gEC is suppressed, because there is no K′ valley channels existing under 6 meV in the right region. Hence, the pure CAR conductance can be obtained without the accompanying of the AR and EC conductances in our system.
Whereafter, we discuss the influence of the superconducting region length d and the light field strength λ on the CAR conductance in Fig. 3. Thereinto, the electric field strengths are set as
and the chemical potentials are set as UL = −λSO, UR = λSO. Figure 3(a) shows gCAR versus E for different d with λ fixed at 3λSO. It can be found that the difference of d will affect gCAR greatly. There are different peak values for different lines. For the line of d = 0.5ξ, the peak value appears at about E = 1.0 meV, while for the line of d = ξ, the peak value appears at about E = 2.0 meV. In addition, when d = 2ξ, which exceeds ξ much, the value of gCAR is much smaller than ones of the other three lines. This result is corresponding to Fig. 3(b), where we calculate gCAR as a function of d for different E. It is obvious to see that the nonlocal conductance exhibits an oscillatory behavior with d because of the quasiparticle interference in the superconducting gap. There appear the conductance peaks whenever the subgap superconducting quasiparticle wave vector matches the resonance wave vector kx = nπ/d. Moreover, for E = 1.0 meV and 2.0 meV, the biggest peak appears respectively around d = 0.5ξ and 1.0ξ, and gCAR decays rapidly when d exceeds the superconducting coherence length, which is identical with the result in Fig. 3(a).
In the same way, the nonlocal conductance versus the incident energy for different light field strengths is described in Fig. 3(c). It can be seen that gCAR for λ = 0.5λSO is much smaller than ones for λ = 2λSO and 3λSO. It is due to that when λ = 0.5λSO, gAR and gEC are no longer suppressed, and then gCAR is reduced. Meanwhile, we also find the difference between the two lines of λ = 2λSO and 3λSO is very small because the band structures in the two cases are very similar. Figure 3(d) depicts the nonlocal conductance as a function of the light field strength for different incident energies. When λ increases gradually, gCAR first has an obvious change and then almost keeps unchanged, which is consistent with Fig. 3(c).
3.2. The switch effects3.2.1. Pure EC conductanceNow, we keep the parameters of the left region the same as Fig. 2 and change the parameters of the right region as
. Thus, the two normal regions have the identical band structures, as shown in Fig. 4(a), where the chemical potentials are set as UL = UR = −λSO. In this situation, when the incident energy is under the bottom of the K↑ band (∼4λSO), an electron of K′ valley from the left region can tunnel into the right region to generate the EC conductance gEC. However, the CAR conductance gCAR and the AR conductance gAR are both almost zero because there are no channels of K valley for the CAR and AR processes in the two normal regions. As a result, a pure gEC with gCAR and gAR being zero can be produced, as depicted in Fig. 4(b). Combined with Fig. 2(b), we find a switch effect between the nonlocal transports, i.e., the perfect CAR and the perfect EC processes, by reversing the perpendicular electric field of the right region from
to
. In other words, transmission particles from the right region can change from holes (CAR) to electrons (EC) just by flipping the direction of the electric field. Besides, the EC conductance spectra for different superconducting region length d are illustrated in Fig. 4(c). As seen, gEC varies with E non-monotonically and has different variation trends for different d.
3.2.2. Pure AR conductanceIn this section, we set the parameters as λ = λSO,
,
, and d = 0.8ξ. The band structures of the normal regions, calculated by Eq. (7), are shown in Fig. 5(a), where the bands of K↑, K↓, and K′↑ are degenerated in the left region and the bands of K↑ and K′↑ are degenerated in the right region. Simultaneously, utilizing Eq. (8), we can obtain the values on the K and K′ points of the bands:
and
for the left normal region, and
,
and
for the right normal region, by which the gaps of all the bands can be obtained. The chemical potentials are set as UL = −λSO and UR = 0, ensuring the Fermi surface at the bottom of the conduction band of the left region. When the incident energy is low (E < 2λSO), the three kinds of conductances gCAR, gAR and gEC would be suppressed due to the fact that there are neither channels for CAR or EC processes in the right region nor channels for AR process in the left region.
However, the situation changes when the incident energy exceeds 2λSO. As seen in Fig. 5(b), the conductances gCAR and gEC are still suppressed, but gAR has evident values. The reason is that there are yet no transport channels for CAR or EC processes existing owing to the gap about 10λSO in the right region, while for incident energies above 2λSO, there exist the hole bands in the left region making the Andreev reflection happen. More specifically, when an electron above 2λSO enters into the superconductor from the left region, a corresponding hole is reflected from the left region at the same time, which produces the AR conductance. That means the pure AR conductance also can be acquired in the present case. In addition, figure 5(c) shows the local conductance gAR versus the incident energy E for different superconducting region length d. It is observed that the lines of gAR are not monotonous and have different variation trends with E for different d. For d = 0.5ξ, gAR has bigger values when E is lower, while for d = 0.8ξ, gAR has bigger values when E is higher. Therefore, not only pure CAR and pure EC but also pure AR can be obtained by controlling the light and electric field. In other words, our system can realize a switch effect among the exclusive CAR, the exclusive EC and the exclusive AR.